Bluetooth Headphone Charging Manual: 3 FAQs

Whether commuting or exercising, do you always like to wear Bluetooth headphones? Listen to your favorite music and immerse yourself in your own little world. Bluetooth headphones always accompany us intimately. But do you know the correct way to charge it? Correct charging method is the key to extending battery life. In the following article, Editor Lu will tell you about common problems with charging and avoid incorrect operations, so that it can accompany us further when used correctly.

Q1. Do I have to use the original charger?

When purchasing electronic products, the original charger is always included. There may be a box at home filled with various plugs, but we always choose one charger from many chargers to share with all products. In fact, different brands or models of chargers may have different powers and specifications. Choosing the right charger can help charge safely and quickly.

If the manufacturer only provides a charging cable but no charger, you can find a suitable charger based on the current marked on the charging compartment. Each product usually has specific voltage and current specifications, so you can check whether it is compatible with your Bluetooth before use. Headphones compatible.

Q2. How to avoid overcharging?

Modern Bluetooth headsets usually have built-in protection mechanisms to prevent overcharging. When the headset battery is fully charged, it will automatically stop charging to prevent damage to the battery. When the Magic Palm Bluetooth glasses charging compartment is fully charged, the indicator light will turn from red to green and charging will stop, so there is no need to worry about overcharging.

Q3. Is the charging environment important?

This may seem inconsequential, but in fact it is closely related to the battery. In the past, there have been too many news reports about electronic products that were suspected of overheating and causing explosions while charging. Therefore, when charging, it must be placed in a ventilated and heat-dissipating environment, and avoid charging in soft pads, heat insulation pads or humid environments. If the charging environment is not good, there may be a risk of overheating, gas release or even explosion of the lithium battery.

Bluetooth Headset NG Charging Action

🔹Excessive discharge

Over-discharging refers to using the battery of a Bluetooth headset to an extremely low power level. This will actually have a negative impact on the health and performance of the headset battery. Therefore, it is recommended that when using a Bluetooth headset, start when the power drops to about 20 to 30%. Charging requires regular use, and do not leave the earphones until they run out of power. As for how to know the charging status of my headphones? Some earphone charging compartments (ex: AirPods) with charging function can check the charging status of the charging compartment and earphones through the mobile phone.

⚠️Tips: If the headphone battery uses a lithium battery, avoid fully charging the battery when charging. Disconnect charging when the battery reaches 80~90% to reduce the pressure on the battery.

🔹Use fast charging

For those who feel uneasy about low battery, "fast charging" may be the best solution, but fast charging may generate more heat during the charging process, which may affect the life of the battery. In addition, some products do not support fast charging (such as Magic Palm products). If forced to use fast charging for charging, the product may be damaged. Therefore, it is recommended to read the manual carefully before charging to determine whether the product supports fast charging.

🔹Failure to clean headphones regularly

When headphones are used for a long time, they may be stained with sweat, skin oils, or even dirt. In terms of hygiene, you should be careful about the growth of bacteria in the ear canal. At the same time, you should also worry that these dirt may cause the metal charging contacts of the earphones to oxidize, causing the earphones to die early. Therefore, it is important to clean the earphones regularly.

➝ Extended reading: " How to use Bluetooth Headsets? "

Bluetooth Headset Charging Manual

Many of the Bluetooth headsets currently on the market will boast that the charging compartment itself has a power storage function, but the Magic Palm's charging compartment currently does not have this function and is purely for storage and charging. When the battery is fully charged, the Magic Palm can be used continuously for 6 to 8 hours, and can be on standby for more than 1 day. If the battery runs out of power when you go out, you only need to take out the battery originally stored in the charging compartment and replace it, and then use it again when you get home. Just place the dead battery in the charging compartment to charge. The following Lu compiles charging instructions using a "rechargeable lithium battery pack". The product itself has an exclusive patent, and the charging method is as simple and convenient as a Bluetooth headset.

STEP1. Replace the battery originally placed in the charging compartment directly.

STEP2. Plug the charging cable into the computer or charger.

STEP3. When charging, the indicator light will light up in red.

STEP4. When the indicator light turns from red to green, it means that the power is fully charged and can be removed.

STEP5. When the Bluetooth headset is fully charged, please unplug the charging cable.

⚠️Tips: Since VENOUS itself does not provide a charger, based on the current condition of the product itself, it is recommended to use a general charging head less than 1A, or plug the USB into the computer for charging as the best way (the current is slow and stable)

VENOUS Bluetooth Glasses Recommended

Maybe you will also have this question: Why don't Lu editor's products use the earphones themselves to charge? In fact, the "Magic Palm Bluetooth Glasses" are grafted with Bluetooth headsets on the glasses body, and use a "battery swap" device. When the battery is out of power, you only need to take off the magnetic battery to charge, solving the problem of charging Bluetooth headsets and Bluetooth glasses. The common pain point of not being able to use it.

In addition, the product itself is an "open headphone" that does not require contact with the ears, making it more comfortable for the ears. During use, you can listen to ambient sounds anytime and anywhere, reducing the risk of outdoor activities.

➝ Further reading: " What are open-back headphones? "

👓Magic Palm Bluetooth Glasses Applicable Situations

Want to learn more about the actual use of Bluetooth glasses? Then come and see our Product Experience! Detailed product reviews and experience sharing allow you to fully understand the product's performance, design and usage experience before purchasing.

VENOUS is not a single professional team, but is composed of countless top teams from the industry. It continues to optimize products and is committed to making excellent products even better. All customers who purchase Magic Palm Bluetooth glasses are entitled to a 12-month warranty. In addition, if you perform "Product Warranty Login" after purchase, you can also extend the warranty period by another 6 months. Don’t know where to find professional optician services? Then come to the store and have a look!